The Cable Connection Ultra-tec® Wire Rope

Cable Railing Accessories

Brace connector plug for flat runs

Plastic plugs with screws for attaching cable braces to wood or aluminum frame and wood deck. Available in bags of 20
. Brace connector for flat runs

Brace connector plug for stair runs

Plastic plugs with beveled bottoms for attaching cable braces to wood or aluminum frame on a stair rake. Available in bags of 20.
Brace connector for stair runs

Cable brace floor plate

FLP-CBS
For mounting cable braces to top or bottom rail or deck.
2-1/4” x 1-1/4” x 1/4”, #4 Finish Stainless Steel
cable brace stainless steel floor plate image.

Stainless steel spacers

Used between two structural steel posts or flat bar for "double end post" type construction.
stainless steel spacers
stainless steel spacers dimensions

Beveled washers (for flat sided frames only)

For use with Invisiware ® Receivers, Radius Ferrules, Push-Lock tensioners and Pull-Lock fittings on stairways or slopes where you need to drill your end post holes at an angle
beveled washers
stainless steel spacers dimensions

42" long anodized aluminum cable brace

CB-42-AN-AL-13 - For Flat Runs
3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Holes pre-drilled at 3-1/8" on center, 13 holes total. For use between structural posts to keep cables code compliant on level runs. Use cable brace plugs to attach to top and bottom rail or deck.
CB-42-AN-AL - For Stair Runs
3/4” x 3/4” tube, 42” long for cutting down to any size rail height. Comes undrilled so slots can be field-drilled to match cable array.
Anodized aluminum cable brace

42" long black aluminum cable brace

CB-42-BL-AL-13 - For Flat Runs
3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Holes pre-drilled at 3-1/8" on center, 13 holes total. For use between structural posts to keep cables code compliant on level runs. Use cable brace plugs to attach to top and bottom rail or deck
CB-42-BL-AL - For Stair Runs
3/4" x 3/4" tube, 42" long for cutting down to any size rail height. Comes undrilled so slots can be field-drilled to match cable array
Black aluminum cable brace.

36" long stainless steel cable brace

CB-34.5-SS-10 - For Flat Runs
1/4" x 1" for 36" high rails. Holes pre-drilled at 3-1/8" on center, 10 holes. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood.
CBS-34.5-SS-10 - For Stair Runs
1/4" x 1" for 36" high rails. Slots pre-drilled at 3-1/8" on center, 10 slots. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood. Must be field-chamfered to match stair angle.
Order custom drilled cable brace
Stainless steel cable brace

42" long stainless steel cable brace

CB-40.5-SS-12 - For Flat Runs
1/4" x 1" for 42" high rails. Holes pre-drilled at 3-1/8" on center, 12 holes. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood.
CBS-40.5-SS-12 - For Stair Runs
1/4" x 1" for 42" high rails. Slots pre-drilled at 3-1/8" on center, 12 slots. For use between structural posts to keep cables code compliant. Weld to metal frames; use cable brace floor plates for attaching to wood. Must be field-chamfered to match stair angle.
Order custom drilled cable brace
Stainless steel cable brace

Cable Grommets

Cable grommets are offered for popular cable diameters of 1/8”, 3/16” and 1/4”. They help prevent rust in exterior applications or elsewhere where moisture is a factor, by providing a barrier between the cable and the painted or powder-coated surface through which the cable is drawn when being installed. They help prevent noise in interior applications by dampening vibration in the cables. Ultra-tec® cable grommets are installed (after the paint or powder coating is applied) into holes in intermediate posts, cable braces and, in the case of the Invisiware® Radius Ferrule, Push-Lock®, and Pull-Lock® fittings into the end post holes through which the cable exits. They are offered in black UV resistant Delrin®.
cable grommets
cable grommets table

Isolation Bushing

When placed over the fitting before inserting into the post, this bushing is used to prevent bimetallic corrosion.
Order B-687-562-437
cable isolation bushing

Cross-Clamp TR4-CCA

For 1/8" diameter cable/rod, great for trellises-and to build substitute intermediate posts to keep cable from displacing.
cross clamp

Stainless steel cleaner and protectant

E-Z Clean Dissolves minor corrosion , then leaves a protective coating that lasts for months.
Includes an 8-oz. spray-on rust and stain remover and a 4-oz. bottle of protectant.
stainless steel cleaner and protectant